[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tarsnap on ReadyNAS NV+



A little update about this:

1. Colin gave me the command for autoconf, which is:

./configure --build=sparc-unknown-linux-gnu
("build" and not "load" ;-)

2. the problem with the dependencies is linked to software version
4.1.7 (most recent one for ReadyNAS Sparc); with the previous one
(4.1.6) it's possible to install tarsnap and its dependencies without
any problem, and it works.

I have contacted Netgear to ask that they update the packages
according to the current software version.

Regards,
EB


2011/1/20 Emmanuel Bégué <medusis@gmail.com>:
> Hello,
>
> I'm trying to setup and use tarsnap on a consumer-level NAS: Netgear
> Readynas NV+, but the configuration script says it's unable to
> recognize the OS (see copy of the error below).
>
> What should I do? should I specify the correct system type (it's
> apparently a Debian distribution on SPARC)... but where?
>
> Also, I get the following error when trying to install e2fslibs-dev
> (which I'll need eventually, according to the Tarsnap setup page):
>
>    The following packages have unmet dependencies:
>    e2fslibs-dev:
>        Depends: comerr-dev but it is not going to be installed
>        Depends: e2fslibs (= 1.40.2-1.netgear2) but 1.40.11-1.netgear2
> is to be installed
>
> Has anyone successfully installed Tarsnap on a ReadyNAS?
>
> Thanks,
> Regards,
> Emmanuel Bégué
>
>
> - - - configure error - - -
>
> checking build system type... config.aux/config.guess: unable to guess
> system type
>
> This script, last modified 2003-07-02, has failed to recognize
> the operating system you are using. It is advised that you
> download the most up to date version of the config scripts from
>
>   ftp://ftp.gnu.org/pub/gnu/config/
>
> If the version you run (config.aux/config.guess) is already up to date, please
> send the following data and any information you think might be
> pertinent to <config-patches@gnu.org> in order to provide the needed
> information to handle your system.
>
> config.guess timestamp = 2003-07-02
>
> uname -m = padre
> uname -r = 2.6.17.14ReadyNAS
> uname -s = Linux
> uname -v = #1 Wed Sep 22 04:42:09 PDT 2010
>
> /usr/bin/uname -p =
> /bin/uname -X     =
>
> hostinfo               =
> /bin/universe          =
> /usr/bin/arch -k       =
> /bin/arch              =
> /usr/bin/oslevel       =
> /usr/convex/getsysinfo =
>
> UNAME_MACHINE = padre
> UNAME_RELEASE = 2.6.17.14ReadyNAS
> UNAME_SYSTEM  = Linux
> UNAME_VERSION = #1 Wed Sep 22 04:42:09 PDT 2010
> configure: error: cannot guess build type; you must specify one
> nas-7F-59-27:/tmp/tarsnap-autoconf-1.0.28#
>